irc:befehle3

IRC Operator Befehle

    Attempts to give a user IRC Operator status.

Syntax: OPER <uid> <password>

    Example: OPER hAtbLaDe foobar234
    

WALLOPS Command

    Sends a "Message" to all those with the umode +w. Only IRCops can send wallops,
    while anyone can view them.

Syntax: WALLOPS <message>

GLOBOPS Command

    Sends a global "Message" to all IRCops. Only viewable by IRCops
    (unlike WALLOPS, which can be viewed by normal users).

Syntax: GLOBOPS <message>

    Example: GLOBOPS Going to be akilling those clones...

CHATOPS Command

    GLOBOPS is usually reserved for important network information. Therefore, for Oper Chat,
    CHATOPS was invented. IRCops  with the +c flag enabled will be able to send/receive CHATOPS messages.

    Syntax:  CHATOPS <message>
    Example: CHATOPS How's everyone doing today?

LOCOPS Command

    Similar to GLOBOPS, except only received by those IRCops local to your server.

Syntax: LOCOPS <message>

    Example: LOCOPS Going to be adding a temp k:line for that user...

ADCHAT Command

    This command sends to all Admins online
    Only for Admins. This is a ChatOps style command

Syntax: ADCHAT <text>

    Example: ADCHAT Hey guys!

NACHAT Command

    This command sends to all NetAdmins & TechAdmins online
    Only for Net/Techadmins. This is a ChatOps style command
    Syntax:  NACHAT <text>
    Example: NACHAT Hey guys!
 	

TECHAT Command

    This command sends to all TechAdmins online
    Only for Net/Techadmins. This is a ChatOps style command
    Syntax:  TECHAT <text>
    Example: TECHAT Hey guys!

KILL Command

    Forcefully Disconnects a user from an IRC Server.
    IRC Operators only.

    Syntax:  KILL <user> <reason>
    Example: KILL Clone5 Cloning is not allowed
     ====== KLINE Command ======
 
    "Bans" a hostmask from connection to the IRC server.
    The user can however connect to other servers on the network !!
    IRC Operators only.

Syntax: KLINE <hostmask> <reason>

    Example: KLINE *@*.aol.com Abuse

UNKLINE Command

    Removes a k:line from the server.
    IRC Operators only.

Syntax: UNKLINE <hostmask>

    Example: UNKLINE *@*.aol.com

ZLINE Command

    Disables all access to the IRC server from a specified IP.
    The IP can however connect to other servers on the network !!
    IRC Operators only.

Syntax: ZLINE <ip> :reason

    Example: ZLINE 127.0.0.1 :Localhost

UNZLINE Command

    Removes a currently active z:Line.
    IRC Operators only.

Syntax: UNZLINE <ip>

    Example: UNZLINE 127.0.0.1

GLINE command

    This command provides timed G:Lines. If you match
    a G:Line you cannot connect to ANY server on the
    IRC network. A time of 0 in the GLINE makes it permanent (Never Expires).
    In Unreal 3.1.1 you may also specify the time in the format 1d10h15m30s.  
    IRC Operators only.
    Syntax:  GLINE <user@host mask> <seconds to be banned> :<reason> (Adds a G:line for user@host) 
             GLINE -<user@host mask>          (Removes a G:line for user@host)
    Example: GLINE *@*.dal.net 900 :Spammers  (Adds a 15 min G:line)
             GLINE *@*.dal.net 1d5h :Spammers (Adds a 29 hour G:line)
 	
     ====== SHUN Command ======
    
    Prevents a user from executing ANY command except ADMIN and respond to Server Pings.
    This effectively prevents them from doing anything on the server.
    A time of 0 on the SHUN makes it permanent (Never Expires).
    In Unreal 3.1.1 you may also specify the time in the format 1d10h15m30s.  
    IRC Operators only.
    
    Syntax :  SHUN <nickname> <time> :<Reason>    (Shun the nickname for time)
              SHUN +<user@host> <time> :<Reason>  (Shun the user@host for time)
              SHUN -<user@host>                   (Removes the SHUN for user@host)
              SHUN                                (View the current SHUN list)
    Example : SHUN +foobar@aol.com 600 :Spamming (Shuns foobar@aol.com for 10 mins for Spamming) 
              SHUN +foobar@aol.com 1d6h :Spamming (Adds a 30 hour SHUN)

GZLINE Command

   This command provides timed global Z:line. If you match a Global Z:Line you cannot
   connect to ANY server on the IRC network
   A time of 0 in the GZLINE makes it permanent (Never Expires).
   You may also specify the time in the format 1d10h15m30s.
   IRC Operator only command.
   Syntax:  GZLINE <user@host mask> <seconds to be banned> :<reason>
    (Adds a Global Z:line for user@host)
            GZLINE -<user@host mask> (Removes a Global Z:line for user@host)
   Example: GZLINE *@*.dal.net 900 :Spammers (Adds a 15 min Global Z:line)
            GZLINE *@*.dal.net 1d5h :Spammers (Adds a 29 hour Global Z:line)

TKLINE Command

   This command provides timed K:Lines. If you match a time K:Line you cannot
   connect to the server until the time has expired
   A time of 0 in the TKLINE makes it permanent (Never Expires).
   You may also specify the time in the format 1d10h15m30s.
   IRC Operator only command.
   Syntax:  TKLINE <user@host mask> <seconds to be banned> :<reason>
    (Adds a Timed K:line for user@host)
            TKLINE -<user@host mask> (Removes a Timed K:line for user@host)
   Example: TKLINE *@*.dal.net 900 :Spammers (Adds a 15 min Timed K:line)
            TKLINE *@*.dal.net 1d5h :Spammers (Adds a 29 hour Timed K:line)

TZLINE Command

   This command provides timed G:Lines. If you match a Timed Z:Line you cannot
   connect to the server until the time has expired
   A time of 0 in the TZLINE makes it permanent (Never Expires).
   You may also specify the time in the format 1d10h15m30s.
   IRC Operator only command.

   Syntax:  TZLINE <user@host mask> <seconds to be banned> :<reason>
    (Adds a Timed Z:line for user@host)
            TZLINE -<user@host mask> (Removes a Timed Z:line for user@host)
   Example: TZLINE *@*.dal.net 900 :Spammers (Adds a 15 min Timed Z:line)
            TZLINE *@*.dal.net 1d5h :Spammers (Adds a 29 hour Timed Z:line)

====== AKILL Command ====== (Use Services AKILL Instead)

    Adds an Autokill for the specific host mask. This prevents any user from that 
    hostmask from connecting to the network. 
    Services Admin & above only ..

    Syntax :  AKILL <user@host> :<Reason>
    Example : AKILL foo@aol.com :Spammers!
     ====== RAKILL Command ====== (Use Services AKILL Instead)
     
    Removes an AKILL set by an IRC Operator or Services.
    Services Admin & above only ..
 
    Syntax : RAKILL <user@host>    

REHASH Command

    Prompts the server to reread the configuration files.
    IRC Operators only.

    Syntax: REHASH <servername> -<flags>
            REHASH -<flags>
    If servername and flags are not specified this rehashes the ircd.conf , removing
    any temporary k:lines.
    If servername is specified, this is used to rehash config files on servername
    Only TechAdmins and NetAdmins may specify a server name
    
    The flags are used to rehash other config files, valid flags are: 
          -dccdeny   - Rehashes dccdeny.conf
          -dynconf   - Rehashes UnrealIRCd Config and Network file
          -restrict  - Rehashes chrestrict.conf
          -vhost     - Rehashes vhost.conf
          -motd      - Rehashes all MOTD files and RULES files (including T:lines)
          -opermotd  - Rehashes the OPERMOTD
          -botmotd   - Rehashes the BOTMOTD
          -garbage   - Force garbage collection
          -badwords  - Rehashes the badwords config.

RESTART Command

    Kills and restarts the IRC daemon, disconnecting all users currently on that server.
    IRC Operators only.

Syntax: RESTART

            RESTART <password>
            RESTART <server> <password>

DIE Command

    Kills the IRC daemon, disconnecting all users currently on the current server.
    IRC Operators only.

Syntax: DIE

            DIE <password>

LAG Command

    This command is like a Sonar or Traceroute for IRC servers
    You type in /LAG irc.fyremoon.net and it will
    reply from every server it passes with time and so on
    Useful for looking where lag is and optional TS future/past travels
    Syntax: LAG <servername>

SETHOST Command

    This command is so you can change your
    Virtual host (hiddenhost) to everything you want to,
    Except special characters. 
    IRC Operators only.

    Syntax:  SETHOST <new hostname>
    Example: SETHOST microsoft.com
 	

SETIDENT Command

    With this command you can change your Ident (username).
    IRC Operators only.
 	
    Syntax:  SETIDENT <new ident>
    Example: SETIDENT root

CHGHOST Command

    Changes the hostname of a user currently on the IRC network.
    IRC Operators only.

Syntax: CHGHOST <nick> <host>

    Example: CHGHOST hAtbLaDe code.slashdot.org

CHGIDENT Command

    Changes the ident of a user currently on the IRC network.
    IRC Operators only.

Syntax: CHGIDENT <nick> <ident>

    Example: CHGIDENT hAtbLaDe FreeBSD

CHGNAME Command

    Changes the "IRC Name" (or "Real Name") of a user currently on the IRC network.
    IRC Operators only.
    
    Syntax:  CHGNAME <nick> <name>
    Example: CHGNAME hAtbLaDe TechAdmin on SomeNet

SQUIT Command

    Disconnects an IRC Server from the network
    IRC Operators only.

Syntax: SQUIT <server>

    Example: SQUIT leaf.*

CONNECT Command

    Links another IRC server to the one you are currently on. Remote connections are also
    possible.
    IRC Operators only.

Syntax: CONNECT <server>

             CONNECT <hub> <port> <leaf>
    Example: CONNECT leaf.*
             CONNECT hub.* 6667 leaf.*
     ====== DCCDENY Command ======
  
    Adds a DCC Deny for that filename mask. This means that any DCC sends of that filename mask
    through the server will be rejected.
    IRC Operators only.
    Syntax : DCCDENY <filename mask> <reason>
     ====== UNDCCDENY Command ======
 
    If the EXACT file you type is found it is removed, else it uses wildcards to search
    IRC Operators only.
    Syntax : UNDCCDENY <filename mask>

SAJOIN Command

    Forces a user to join channel(s). Can only be used by a Services Admin.

Syntax: SAJOIN <nick> <channel>[,<channel2>..]

    Example: SAJOIN hAtbLaDe #OperHelp
             SAJOIN hAtbLaDe #Support,#IRCHelp

SAPART Command

    Forces a user to leave channel(s). Can only be used by a Services Admin.

Syntax: SAPART <nick> <channel>[,<channel2>..]

    Example: SAPART hAtbLaDe #OperHelp
             SAPART hAtbLaDe #Support,#IRCHelp
     ====== SAMODE Command ======
 
    Allows a Services Administrator to change the mode on a channel,
    without having Operator status.

Syntax: SAMODE <channel> <mode>

    Example: SAMODE #Support +m

RPING Command

    This will calculate the milliseconds (Lag) between servers

    Syntax: RPING <servermask>
     ====== TRACE Command ======
 
    TRACE is useful to know what servers are connected to
    what. Sometimes TRACE can be confusing, especially if you are using
    it for the first time.  
    Syntax:  TRACE <servername> 
    Example: TRACE irc.fyremoon.net

OPERMOTD Command

    Shows the IRCd Operator MOTD
    IRC Operators only.
    Syntax: OPERMOTD

ADDMOTD Command

    This will add the text you specify to the MOTD
    (the general motd - T:lines doesnt count ..)
    Server Admin & Co-Admin only
    Syntax: ADDMOTD :text

ADDOMOTD Command

    This will add the text you specify to the Operator MOTD
    Server Admin & Co-Admin only

    Syntax: ADDOMOTD :text

SDESC Command

    With this command you can change your Server Info Line
    Without having to squit and reconnect.
    This is a Server Admin/Co Admin only command
 	
    Syntax:  SDESC <New description>
    Example: SDESC If you belong to me..
	

MKPASSWD Command

    This command will encrypt the string it has been given
    So u can add it directly to the unrealircd.conf if you use
    Encrypted passwords. Type can be crypt, sha1, or md5. Sha1
    and md5 are only available when compiled with SSL support.
    Syntax : MKPASSWD <method> <password>

TSCTL Command

    This is a highly advanced command
    IRC Operators only.
    Syntax: TSCTL OFFSET +|- <time>   (Adjust internal IRC clock)
            TSCTL TIME                (Will give TS report)
            TSCTL ALLTIME   (Shows the TS report of all Servers)
            TSCTL SVSTIME <timestamp>  (Sets the Time on all servers)

HTM Command

    Switches the server In & Out of High Traffic Mode
    It is activated when the server is receiving extremely high amounts of information
    IRC Operators only.
    Syntax: HTM [option]
    If no option is specified it just displays the current HTM state
    If an option is specified it does a more specific task, valid options are:
    ON         - Force HTM to activate
    OFF        - Force HTM to deactivate
    NOISY      - Make HTM announce when it is entering/leaving HTM
    QUIET      - Stop HTM from announcing when it is entering/leaving HTM
    TO <value> - Tell HTM at what incoming rate to activate HTM
  • irc/befehle3.txt
  • Zuletzt geändert: 2024/01/12 22:14
  • von 127.0.0.1